Armor art – Ultra Transparent Cast Type Epoxy Art Resin 700Gr Set
Direction for use :
Mix two parts resin and one part hardener in a cup, beginning with the hardener. Use our resin coverage calculator to calculate the amount you need. Stir for at least 3 minutes to ensure the mixture reaches the sides and bottom of the container. Transfer the blend to a second cup and stir again for homogeneity and optimal curing. Worktime is 26-29 minutes at 23-40C. Level the project, then pour ArmorArt over it. The resin will begin to level by itself, and bubbles will appear and pop on their own, or you can pop them using a torch. Allow to dry for 48 hours in a dust-free environment. The degree of hardening depends on temperature.
DIRECTION FOR USE
Pour five part of resin and two part of hardener into a mixing cup. We recommend
pour first hardener and the resin.You can refer to use our resin coverage calculator
to determine to how much you’ll need.
Mix well the two components all the way yo the corners of the recipient at least 3
minutes. An incomplete mixing will leave sticky spots that just won’t cure 1.
Transfer the mixture into a second recipient and mix again to be sure homogeneity
of the resin and optimum hardening. You will have about 60+ 3 minutes of working
time at 23 +2°C.
After making sure your project or application is level, pour ArmorArt over your
project. You can spread it around into projects. It’ll start to level on its own. You’ll
notice bubbles will begin to rise to the surface. Many of bubbles will pop on their
own, you can also pop them with torch for flawless finish.
Allow to dry for 48 hours away from dust. The hardening is progressive and varies
with the room temperature.